Replace this with a real customer quote. Aim for 2–4 sentences with specific use case — what pump, what they were pulling, why synthetic was the right call.
Vacuum Pump Oil
VPO-46Synthetic Vacuum Pump Oil · ISO VG 46 · Anti-Foam + Anti-Corrosion · Qt & Gal
3–5× Longer LifeMade in USAISO VG 46SyntheticAnti-FoamAnti-CorrosionOEM Spec
$19.15
Out of stock· backorder available
Direct from the manufacturer — Miami HQ, full warranty & tech support included.
Out of stock
- Bottle Size:
- Each 32 oz
Assembled
Tested in Miami
Standard
OEM Spec
Ships
1–2 Days
- Field-tested by working HVAC technicians
- Free returns within 30 days
- Direct manufacturer support — Miami HQ
- ORDER IN THE NEXT — AND IT SHIPS TODAY FROM MIAMI
3–5×LONGER
Oil Life vs Mineral
Synthetic resists oxidation and holds viscosity at high pump temperatures — mineral starts breaking down after a few hours, synthetic lasts dozens
USAMADE
Manufactured in America
Synthetic base oil + additive package blended to OEM vacuum pump lubricant specs in the USA — same plant, same QC every batch
ISO 46
Industry-Standard Viscosity
~46 cSt at 40°C, Viscosity Index 118 — the spec every HVAC rotary-vane vacuum pump is built around
ANYPUMP
Universal Compatibility
Robinair, Yellow Jacket, JB Industries, Fieldpiece, HCPRO HCBK/HCEC — rotary vane, scroll, piston, diaphragm
Why this oil
Cheap oil ruins
expensive pumps.
USA-manufactured synthetic vacuum pump oil engineered for HVAC, refrigeration, and lab vacuum work. Mineral oil oxidizes, foams, and traps moisture. Your $200 vacuum pump deserves better than the $5 oil from the auto-parts aisle — 3–5× longer life, deeper vacuum, less pump wear.
Synthetic by design
Resists oxidation, holds viscosity at high pump temperatures, and absorbs less moisture than mineral oil. The result: deeper vacuum, longer oil life (3–5×), reduced pump wear. Mineral oil starts breaking down after a few hours of operation; synthetic lasts dozens. Pulled the pump for a major job? Synthetic stays clear longer through the work cycle.
Anti-foam, anti-moisture
Anti-foam additive prevents cavitation during deep pulls — critical when you're chasing 500 microns on a humid day. Anti-corrosion package protects pump internals. Low moisture absorption means the oil doesn't load up with water from the system you just evacuated, so the next pull-down hits target faster.
USA-made, OEM-grade
Compatible with Robinair, Yellow Jacket, JB Industries, Fieldpiece, HCPRO HCBK/HCEC and most other rotary vane vacuum pumps. ISO VG 46 is the industry-standard spec — verify your pump's OEM call-out, but most HVAC vacuum pumps spec this exact grade. Manufactured in the United States to OEM vacuum pump lubricant performance standards.
Full Product Description
Synthetic vacuum pump oil ISO VG 46 engineered for HVAC, refrigeration, and laboratory vacuum work — the only chemistry that pulls deep vacuum without foaming, oxidizing, or trapping moisture. Cheap mineral oil ruins expensive pumps. Your $200 vacuum pump deserves better than $5 oil from the auto-parts aisle.
HCPRO Performance VPO-46 is a premium synthetic vacuum pump lubricant with viscosity index 118, ~46 cSt at 40°C, and ultra-low vapor pressure. The additive package combines anti-foam, anti-corrosion, anti-oxidation, and anti-wear chemistry specifically formulated for rotary-vane vacuum service. Compatible with Robinair, Yellow Jacket, JB Industries, Fieldpiece, HCPRO HCBK-12DC, HCEC-6S, and other rotary vane, scroll, piston, and diaphragm vacuum pumps.
Who this oil is for
HVAC service techs pulling refrigerant evacuations below 500 microns. Refrigeration contractors servicing commercial cold rooms and walk-ins. Mobile auto A/C technicians doing recharges. Lab technicians running rotary-vane vacuum equipment. Anyone whose pump cost more than $100 and whose customer expects a clean install.
When to use it
Change after every 1–3 evacuations or whenever the sight glass shows cloudy, dark, or contaminated oil. Always change before a deep-vacuum job (compressor burnout, large refrigeration system, A2L line set). Use at every vacuum pump oil change interval the OEM specifies — typically every 20–30 hours of run time for HVAC service pumps. ISO VG 46 is the industry-standard viscosity; verify your pump's spec sheet, but most HVAC vacuum pumps call for this exact grade.
Why synthetic instead of mineral pump oil
Synthetic oil resists oxidation, holds viscosity at high pump temperatures, and absorbs significantly less moisture than mineral. The result: deeper vacuum, 3–5× longer oil life, and reduced pump wear. Mineral oil starts breaking down within a few hours of operation — synthetic holds for dozens. Mineral foams during deep pulls and caps your achievable vacuum at ~1,000 microns; synthetic with low vapor pressure goes below 100 microns on a clean system.
Available in quart (32 oz) and gallon (128 oz) sizes, plus 2-pack, 4-pack, and 12-pack quart presentations for shops and high-volume service techs. Manufactured in the USA to OEM vacuum pump lubricant performance standards.
Technical specifications
What the lab measures, what the compressor cares about.
Manufactured in the USA to OEM vacuum pump lubricant performance standards. Engineered specifically for vacuum service — ultra-low vapor pressure for deep pull-downs, anti-foam package to prevent cavitation, anti-corrosion to extend pump life.
Type
Synthetic vacuum pump oilEngineered specifically for vacuum applications — not a repurposed compressor oil
Manufactured in
United States of AmericaOEM-grade vacuum pump lubricant standards — no imported chemistry
ISO viscosity grade
ISO VG 46Industry-standard for HVAC and refrigeration vacuum pumps
Viscosity at 40°C
~46 cStService temperature standard reference
Viscosity at 100°C
~9.8 cStHigh-temperature operating reference
Viscosity Index
118Higher VI = more stable viscosity across temperature range
Flash point
~220°C / 430°FHigh thermal stability — resists breakdown under load
Pour point
< -30°C / < -22°FCold-weather pump-down without crystallization
Vapor pressure
Ultra-lowSupports deep-vacuum pull-downs below 100 microns
Additive package
Anti-foam · anti-corrosion · anti-oxidation · anti-wearEngineered specifically for vacuum service, not generic
Pump compatibility
Rotary vane, scroll, piston, diaphragmHVAC, refrigeration, lab, industrial vacuum equipment
Pump brand compatibility
Robinair, Yellow Jacket, JB Industries, Fieldpiece, HCPRO HCBK / HCECMost HVAC vacuum pumps spec ISO VG 46 — verify your OEM
Container sizes
32 oz (quart), 128 oz (gallon), 2-pack, 4-pack, 12-pack quartSelect size at checkout via variant picker
Shelf life
3–5 years (sealed)Once opened, use within 12 months — keep cap sealed
Hazmat / safety
Non-hazardous, non-toxicNot listed under California Prop 65
In the box
Drain old, pour new, run dry. 5 minutes per change.
Synthetic Vacuum Pump Oil bottleQuart (32 oz) or gallon (128 oz) — viscosity ISO VG 46 printed on label
Application + safety insertOil change interval guide, pump compatibility chart, and safe-handling information
Customer reviews
What working techs say after putting it on the job.
12,000+
HVAC pros served
4.9★
Average rating
94%
Repeat buyers
Replace this with a real customer quote. Aim for 2–4 sentences with specific use case — what pump, what they were pulling, why synthetic was the right call.
Replace this with a real customer quote. Aim for 2–4 sentences with specific use case — what pump, what they were pulling, why synthetic was the right call.
Tools that pair with the VPO-46.
22-0009
HCEC-6S 6 CFM HVAC Vacuum Pump — Single Stage, 1/2 HP, 115V
$164.90
22-0011
HCBK-12DC 12 CFM Sparkless Vacuum Pump, BLDC Motor 100–240V
$640.16
02-0053
RPO-32 Synthetic POE Refrigeration Oil — R-410A, R-32, R-134a, R-1234yf & A2L
$52.95
02-0025-6
HVAC Flash Flush Solvent — Removes Acid After Compressor Burnout (32oz)
$29.00
22-0080
HC-2V2Y3P Manifold Gauge Set R32, R290, R600 w/ 3ft Hoses
$87.95
Common questions
Answers from the warehouse floor.
Still stuck? Call our techs at 305-720-0044.
Does HCPRO warranty the products?
Yes — every HCPRO product ships with a 1-year limited warranty against manufacturing defects. We'll replace the bottle if it fails to meet stated specs under normal use. See our full warranty terms.
Why synthetic instead of mineral pump oil?
Synthetic oil resists oxidation, holds viscosity at high pump temperatures, and absorbs less moisture than mineral oil. The result: deeper vacuum, longer oil life (often 3–5× longer), and reduced pump wear. Mineral oil starts breaking down after a few hours of operation; synthetic lasts dozens. A $200 vacuum pump deserves better than the $5 oil from the auto-parts aisle.
How often should I change the oil?
Change after every 1–3 evacuations or whenever the sight glass shows cloudy, dark, or contaminated oil. After a major job (compressor burnout, large refrigeration system), change the oil before the next pull-down — contamination from the previous job will kill vacuum performance.
Will it work in my Robinair, Yellow Jacket, JB, or other brand pump?
Yes — ISO VG 46 is the industry-standard viscosity for HVAC vacuum pumps. Compatible with Robinair, Yellow Jacket, JB Industries, Fieldpiece, HCPRO HCBK/HCEC, and most other rotary vane vacuum pumps. Verify your pump's OEM spec — the vast majority call for ISO VG 46.
Can I mix it with my existing pump oil?
Don't mix — drain the old oil completely first. Mixing synthetic with mineral or another brand's synthetic can disrupt additive packages and reduce performance. A clean drain and refill takes 5 minutes. Run the pump for 30 seconds with the inlet open to flush residual oil, then drain and refill with fresh synthetic.
What's the shelf life?
3+ years unopened, stored in a cool dry place. Once opened, use within 12 months and keep the cap sealed — synthetic oils still absorb moisture from air (just much slower than mineral). Leaving half-bottles on the shelf for years degrades the additive package.
Does it support deep vacuum (below 500 microns)?
Yes — that's the design intent. Ultra-low vapor pressure is the spec that lets vacuum pumps pull below 500 microns and hit 100 microns or lower on a clean system. Mineral oil's higher vapor pressure caps the achievable vacuum. The anti-foam additive also prevents cavitation during deep pulls.
Will using HCPRO products void my OEM pump warranty?
No. Under the Magnuson-Moss Warranty Act of 1975, an OEM cannot void your factory warranty for using compatible aftermarket fluids. Our vacuum pump oil meets ISO VG 46 industry-standard performance specs. If a dealer pushes back, contact us and we'll send the documentation.
Can I return an unused bottle?
Yes — free returns within 30 days for unopened bottles in original packaging. Opened bottles can't be returned for resale (chemical product). Read our full return policy.
Do you offer bulk pricing for shops?
Yes — we already offer multi-packs (2-pack, 4-pack, 12-pack quart) at discounted rates on this page. For orders larger than that, email hcproproductsusa@gmail.com with your business details and we'll send a custom bulk quote within 24 hours.
If you have any questions, you are always welcome to contact us. We'll get back to you as soon as possible, within 24 hours on weekdays.
-
Shipping Information
- FREE SHIPPING for full pallet orders going to zoned industrial addresses within the freight delivery network that have a 48-inch loading dock and access for 53-foot trailers. If you are not sure if your location qualifies for free shipping, please CONTACT US HERE.
-
Customer Support
Talk to our support team for personalized assistance.
-
FAQ’s
Welcome to our FAQ, we are so happy to have you here and as a client.
We have tried to answer the most common questions. -
Contact Us
We'd love to hear from you. Our team is here to help.